Antenna Rotator System - Setup - Logger32

Since v1.01 Build 63 the Logger32 is supported (08/February/2004)

The Logger32 program is another excellent Log Program that it's actually supported by the ARSWIN. If you have a previous version, you will need to update it.

Logger32 V2.5 will require ARSWIN V2.2a (or newer) to use some advanced features! 
And check that ARS.INI has the following parameters enabled:

[Logger32]
Active = 1                       ' Active = 1, sends data to lpCaption program; 
                                      '          = 0, disabled this option
Refresh = 5                     ' timer in seconds, for sending 
                                      ' the azimuth position; default = 5 seconds
lpCaption = Logger32       ' Name of the caption program, logger32 by default

Configuration

You need to choose the "EA4TX ARS" interface at: Setup->Rotor Type

No more parameters are required (Com port or LPT port) between the Logger and ARSWIN, since the Logger and ARS interface via "Windows Messaging"

At the ARSWIN is not necessary to configure any special parameter

Antenna Rotator System - Setup - Logger

Since v8.01a the Logger is supported (10/January/2001)

Configuration

You need to choose the "EA4TX ARS" interface at: Config->Rotor Type

No more parameters are required (Com port or LPT port) between the Logger and ARSWIN, since the Logger and ARS interface via "Windows Messaging"

At the ARSWIN is not necessary to configure any special parameter