FAQ's (8)

Q: How must I configure Orbitron, WispDDE and ARSWIN for working them together?

A: If you want to interface Orbitron vs ARSWIN, you will need to use  WISPDDE by Fernando - CX6DD. The setup is as follows:

Press on the picture for enlarge

You must enabled at Orbitron the driver WispDDE so Orbitron will acts as a DDE Server. In this way, WispDDE will be connected and capture the information from Orbitron. To make the link you must configure at WispDDE -> Setting DDE Link:

• Receive DDE from: Satscape
• Source Aplication: orbitron
• Link Topic: Tracking
• Link Item: TrackingData
• Query Interval: 1

Once the data (Az & El) is available at WispDDE, ARSWIN will be connected via DDE interface. 
Select at ARSWIN -> Satellite tracking program:

• WispDDE

On previous picture, it's displayed how to run Orbitron, WispDDE and ARSWIN. Press over the picture for enlarge. 

Visit Download Area for download the last ARSWIN V2.1b or WispDDE.

 [<< Prev]  |     [Next >>]